Honeywell - Conventional or heat-pump thermostat with 3 stages (3H/3C) for commercial applications
About This Product
Conventional or heat pump thermostat with three stages (3 heat/3 cool). Integrated hum sensor. Programmed via keypad. T7351 commercial programmable thermostat controls 24-volt (AC) commercial single zone heating, ventilating and air conditioning (HVAC) equipment. Thermostat includes keypad and display for 365-day programming and equipment control connections. Typically used in buildings (restaurants, shopping malls, office buildings and banks) under 55,000 square feet. For single zone rooftop units, split systems, heat pumps or hot/chilled water systems. Two Occupied and two Not Occupied periods per day. Individual heat and cool set points available for Occupied and Not Occupied periods. PID controller (proportional-integral-derivative controller, a generic control loop feedback mechanism that adjusts process control inputs) minimizes temperature fluctuations. Recovery ramp control automatically optimizes equipment start times based on building load. Convenient overrides allow temporary set point changes. Keypad multi-level lockout available with all models. Remote sensor capability for temperature (including outdoor air and discharge air) and humidity sensors. Auxiliary sub-base contact typically interface with a Honeywell economizer system (for total rooftop control integration) or act as dehumidification output. Universal Versaguard thermostat guards available.