Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
Login, some information and ordering will be periodically unavailable between 12:01 AM Saturday 10/12/2019 through end of day Sunday 10/13/2019 due to technical maintenance.

Duct Sealers, Tapes & Adhesives

Filter Products

Grid
List
Items 1–36 of 270 total
Application
  1. 1104RB is formulated for use on piping systems for potable water, DWV (drain, waste, vent), electrical conduit, irrigation and sewer / drain applications. 2
  2. 2 mil Al. Foil 1
  3. A Hi-Temp Silicone That Performs From -85°F To 500°F For Numerous Sealing And Bonding Applications. 1
  4. A superior closure system for Class 1 flexible air 1
  5. Acts as a superior closure system for use with flexible air ducts and air connectors. Recommended for use on UL list flexible air ducts in accordance with manufacturers' installation instructions. For use in heating, air conditioning, ventilating and refr 1
  6. Acts as an uncoated facing for all service jacket (ASJ) faced duct piping systems 1
  7. Adhesive Sealant For General Heating, Ventilation And Air Conditioning Applications. Adheres To Clean Metal, Glass, Many Types Of Wood, Silicone Resins, Vulcanized Silicone Rubber, Ceramics And Plastic Surfaces. 3
  8. Aerosol Spray 2
  9. All schedules and classes of PVC up to 4" in diameter 1
  10. Applies white, dries clear 1
  11. Bonding, sealing, potting, encapsulating and protective coating operations where parts must perform at high temperatures 1
  12. Brush 2
  13. Brush, Putty Knife, Caulk Gun or Trowel 15
  14. Brush, Roll or Spray 2
  15. By brush, trowel or spray 1
  16. Caulk Gun 4
  17. Cementing PVC piping 1
  18. CLOSURE SYSTEM FOR CLASS 1 FLEXIBLE DUCT 1
  19. Commercial and residential 1
  20. Compatible with virtually all types of thermal insulation. 1
  21. Contains PTFE & synthetic fibers for superior performances. Can be pressurized immediately following application. 1
  22. Contractor tough closure system for use on flexible air ducts and connectors. UL181B-FX listed 1
  23. Cork tape 1
  24. DC Poly Tape 2
  25. Duct board and pipe insulation 1
  26. Duct joint sealing, aluminum siding/gutter/sheet metal repair 1
  27. Duct sealing and HVAC contractor use 4
  28. Duct sealing, General Repair 1
  29. Duct sealing, Sheet metal repairs 1
  30. Excellent for HVAC projects and wall/floor penetrations. 1
  31. Fiber duct board, flexible duct and sheet metal duct 1
  32. Fibrous and sheet metal ducts 4
  33. Firestop 1
  34. Foam pipe insulation used in line sets 2
  35. For both interior and exterior use 1
  36. For plugging openings through foundations or around refrigeration tube entry. 1
  37. For sealing seams and joints on duct and pipe insulation systems. 1
  38. For sealing seams and joints on duct and pipe insulation where ASJ inulation facing is used. 3
  39. For taping outdoor HVAC components 1
  40. General purpose fireblock/ 1
  41. General Purpose Insulation 1
  42. General purpose sealant with the lubricity of PTFE for metal pipes. TYPICAL APPLICATIONS– Air conditioning fittings Temperature sending fittings Hydraulic fittings 1
  43. General repair, seaming poly sheeting 3
  44. Hand Applied 1
  45. Heavy Duty Adhesive Spray 1
  46. Heavy duty contractor and manufacturing uses 1
  47. Heavy duty duct and manufacturing uses 1
  48. Heavy duty ducting tape 1
  49. High performance duct closure tape is specifically designed for use as a vapor seal on reinforced fiberglass duct board 1
  50. High performance foil insulation tape is specifically designed for sealing sheet metal ducts and metal duct connections. 1
  51. High performance insulation tape is ideal for use as a vapor seal for reinforced fiberglass or mineral wool thermal insulation 2
  52. Hot or cold piping 1
  53. Hot/Cold Water Pipes, Refrigerant Lines 3
  54. HVAC / Refrigeration 1
  55. HVAC / Refrigeration Adhesive 1
  56. HVAC Uses On Sheet Metal, Flex Duct And Thermal Insulation. Bottom Board On Manufactured Homes 1
  57. HVAC, Residential, Commercial, Industrial 1
  58. HVACR systems. Sealant for lineal caulking applications. 1
  59. Indoor or outdoor sealing of low, medium & high pressure HVAC duct systems (includes: metal duct, fiberglass duct & flexible duct systems). Seal cracks and seams in gutters, roof alleys, eaves, hips and ridges. Seal around chimneys and vent stacks. Repair 1
  60. Indoor/Outdoor Rolled Mastic Sealant 1
  61. Indoor/outdoor sealing of HVAC systems 2
  62. Insulation/Duct Liner Application 1
  63. It forms a resilient fluid and gas-tight seal, and is impervious to ammonia gas, aliphatic and aromatic petroleum distillates, including gasoline, chlorited hydrocarbons, refrigerants, mineral and synthetic refrigeration oils, vegetable oil, fuel gasses, 1
  64. Joints and seams in HVAC systems, general industrial 3
  65. Leak Proof Seal 1
  66. LOW VOC PURPLE PRIMER is formulated with a blend of powerful solvents which makes it a fast acting primer that removes any glaze often found on plastic pipe and fittings and softens the plastic so that it will accept the appropriate plastic solvent cement 1
  67. Mastic 2
  68. Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. 1
  69. PERMANTLY SEAMS SEAMS IN FIBERGLASS DUCTS 1
  70. Pipe wrap 1
  71. Plumbing 4
  72. Polyvinyl chloride (PVC) solvent cement joins both rigid and flexible PVC pipe and socket-type fittings with meet class 1245 as defined in ASTM specifications D1784. 2
  73. Polyvinyl chloride (PVC) solvent cement used for joining PVC pipe and socket-style fittings which meet class 12454 as defined in ASTM specification D1784, ABS to PVC non-pressured transition joints, schedule 40 up to 2" pressure, up to 4" non-pressure pip 3
  74. Poured and precast concrete, masonry work, window and door perimeters. For exterior use only. 1
  75. Prepares surfaces for superior bonding strength. For use on PVC and CPVC pipe, tubing and socket-type fittings in both schedule 40 and schedule 80 2
  76. Primarily used for sealing fiberglass 1
  77. PVC and CPVC applications 1
  78. PVC Cement 7
  79. PVC, CPVC, ABS Cement 2
  80. Recommended for use on high temperature refractory surfaces found in fireboxes and other parts of furnaces, boilers, stoves and stokers used for comfort heating. It works well on flue pipes, clean outs, ducts and chimney collars. When cured it is fire pro 2
  81. Recommended for use on UL listed fiberglass duct board in accordance with manufacturers' installation instructions. Meets UL 181 A-P standard for use as a closure material on fiberglass duct systems and UL-181 B-FX standard for use on flexible air ducts a 3
  82. Rolled/Pressure Applied 6
  83. Seal and patch FSK duct boards and blankets. 1
  84. Seal around bathtubs, shower stalls, bathroom vanities, kitchen counters, sinks, windows and doors. "Replacing ceramic tiles and making new 2
  85. Seal Class 1 Flex Duct And Sheet Metal. Indoor And Outdoor 1
  86. Seal duct work for heating, air conditioning and refrigeration systems. Sealing, patching and securing insulation materials. General purpose patch and repair. 1
  87. Seal flexible duct systems. Seal fiberglass insulation board. Hold insulation materials in place. General contractor uses including bundling, sealing, and patching. 1
  88. Seal penetrations of plumbing, refrigeration and AC lines, ducts, vents and electrical cable through fire-rated floors, walls and ceilings. 1
  89. Sealing construction gaps and through-penetrations 1
  90. Sealing reflective insulation, flexible air duct and air connectors 1
  91. Sealing, closure, and repair of sheet 2
  92. Seals Ducts 13
  93. Seals joints and seams on fiberglass duct board and flexible duct 2
  94. Seals Pins 1
  95. Seals PVC 3
  96. SEAMING POLY SHEETING, COLOR CODING 1
  97. Seaming Tape for vinyl faced fiberglass insulation 1
  98. SHEETING AND GEN'L PURPOSE REPAIR 1
  99. SHEETING, GENERAL PURPOSE 1
  100. SHEETING, MAINTENANCE, GENERAL REPAIR 2
  101. Smooth, creamy, easy-spreading furnace and retort cement that sticks where applied 1
  102. Spray Adhesive 2
  103. Spray Gun for canisters 1
  104. Spray, Roll, Brush 1
  105. Standard formulation. Commercial and residental applications 1
  106. Stiff Brush, putty knife, spatula 1
  107. SUPERIOR CLOSURE SYSTEM FOR CLASS 1 FLEXIBLE DUCTS AND AIR CONNECTORS 1
  108. TAPE JOINTS/SEAMS IN DUCT WORK FOR AC 1
  109. TAPING JOINTS AND SEAMS IN DUCT WORK FOR AC 3
  110. Teflon tape 3
  111. To solvent weld ABS, PVC, and CPVC 1
  112. Tough, contractor grade closure system for UL listed flexible, non-metallic air duct. Dryer vent and bath fan duct sealing. Suitable for metal to metal connections in HVAC and refrigeration applications. 1
  113. Two Part Sealing System 1
  114. UL 181B-FX BOPP tape for sealing class 1 duct systems 1
  115. Use On Class 1 Flex Duct. Connections And Splices 3
  116. Used for sealing and gasketing needs. 4
  117. VAPOR BARRIER SEAL FOR INSULATION 1
  118. VAPOR BARRIER SEAL FOR INSULATOIN 1
  119. Vapor sealing and ductwork 1
  120. Water-based fiber-reinforced duct sealant/mastic formulated for indoor/outdoor use. 1
  121. Works wet or dry 1
  122. Wrap and protech foam insulation on outdoor linesets 1
  123. Show more options
Brand
  1. 3M™ 1
  2. Armacell 8
  3. Arrow 3
  4. Associated Sales 1
  5. Berry 4
  6. BOSS® 6
  7. DiversiTech 15
  8. Ductmate 6
  9. Duro Dyne 5
  10. Fasson 2
  11. Hardcast/Carlisle 34
  12. Ideal Tape 25
  13. K-Flex 2
  14. Mars 2
  15. Merco 3
  16. Mon-Eco 13
  17. Nashua® 17
  18. Non-Branded 1
  19. Nu-Calgon 7
  20. Oatey 13
  21. Permatex® 1
  22. Polyken® 24
  23. Polymer Adhesives 14
  24. RCD Corporation® 7
  25. Rectorseal® 15
  26. Scotch® 4
  27. Shurtape® 6
  28. SpecSeal 1
  29. TRADEPRO® 2
  30. TREMCO 1
  31. Venture Tape™ 20
  32. Versi-Foam 1
  33. Versi-Tite 1
  34. Vimasco 2
  35. Whitlam 3
  36. Show more options
Composition
  1. 100% Silicone 1
  2. 2 Mil Al. Foil 2
  3. 2 mil Aluminum foil 2
  4. 2 mil Foil Tape 2
  5. 2.2 mil foil 1
  6. 2mil Al Foil 1
  7. 2Mil Al. Foil 1
  8. 5 mil PVC tape 3
  9. Acrylic Adhesive with printed OPP Film backing 1
  10. Acrylic laminate 1
  11. Aluminum 6
  12. Aluminum Foil and acrylic adhesive 4
  13. Aluminum Oxide 1
  14. Black Polyethylene Foam 1
  15. BOPP (Printed) 1
  16. Butane, acetone, cyclohexane, propane 1
  17. Cloth Duct Tape 2
  18. Cork 1
  19. Cork Insulation Tape is a polymer-based material containing butyl rubber, asphalt, and granulated cork (55% by volume). It contains no fibers. 1
  20. D.C. Polyester 2
  21. Engineered Polymer 1
  22. Ethanol, CAS No. 64-17-5, EINECS No. 200-578-6 , 20-30% 1
  23. Fiber reinforced, water-borne, non-sagging, terpolymer dispersion 3
  24. Fiberglass Weave 1
  25. Flammable Solvent (Paste) 2
  26. FOIL & BUTYL W/LINER 1
  27. FOIL & RUBBER 1
  28. FOIL AND ACRYLIC 2
  29. FOIL AND BUTYL RUBBER 2
  30. FOIL AND COLD WEATHER ACRYLIC 1
  31. FOIL AND SYNTHIC RUBBER 1
  32. Foil backing, acrylic adhesive, paper release liner. 3
  33. Foil backing, butyl rubber adhesive 1
  34. Foil backing, butyl rubber adhesive, liner (Mastic Tape) 1
  35. Foil backing, synthetic rubber adhesive, paper release liner. 1
  36. FOIL WITH SYNTHETIC RUBBER 3
  37. Foil, printed, Butyl rubber adhesive 1
  38. Foil, Skrim, Paper Release Liner 1
  39. Foil/Scrim/Kraft Lamination 5
  40. FOIL/SKIM/KRAFT & ACRYLIC AND LINER 1
  41. FOIL/SKIM/KRAFT & RUBBER w/ Kraft LINER 1
  42. Gypsum 1
  43. Isocyanate and Polyol Blend 1
  44. Latex 8
  45. Latex based, high solids firestop compound 1
  46. Metallized coated cloth backing, rubber adhesive 1
  47. Methyl Alcohol (less than 1.4), Ammonium Hydroxide (less than 0.6), Crystalline silica (impurity)* (less than 2.3) 1
  48. Methyl Ethyl Ketone, tetrahydrofuran, cyclohexanone, acetone 1
  49. Mill finish aluminum substrate with butyl adhesive/sealant 1
  50. Modified Butyl 1
  51. Modified Butyl, Aluminum 4
  52. Modified Butyl, White TPO 1
  53. Nitrile/PVC 1
  54. Non-Flammable Solvent 1
  55. OPP FILM AND ACRYLIC ADHESIVE 1
  56. OPP FILM WITH ACRYLIC ADHESIVE 1
  57. OPP Film, acrylic adhesive 1
  58. Paste 2
  59. PE COATED CLOTH 9
  60. PE COATED CLOTH AND RUBBER ADHESIVE 1
  61. PE Coated Cloth backing, rubber adhesive 1
  62. PE COATED CLOTH WITH RUBBER ADHESIVE 8
  63. PE film, cloth carrier, natural rubber adhesive 3
  64. Polyethylene 5
  65. Polyethylene foam 1
  66. Polymer 2
  67. Polypropylene 2
  68. Polytetrafluoroethylene (PTFE) 3
  69. Polyvinyl Chloride 1
  70. Propane, acetone, butane, heptane, heptane, branched, cyclic and linear, methyl acetate, toluene 1
  71. PTFE plus synthetic fibers 1
  72. PU Foam 1
  73. Reinforced ASJ 1
  74. Reinforced FSK 5
  75. Rubber resin adhesive and PVC backing 1
  76. Rubber/Solvent 7
  77. Silica, Ethyltriacetoxysilane 2
  78. Silicone 4
  79. Silicone Rubber 4
  80. Sodium Silicate Caulk 1
  81. Solvent based 1
  82. Solvent-based contact adhesive 2
  83. Synthetic latex 22
  84. Synthetic Polymer and Resins 1
  85. Synthetic polymer based mastic 1
  86. TALC 14807-96-6 , ETHANOL 64-17-5, CASTOR OIL 8001-79-4, POLYVINYL RESIN 63148-65-2, 2-PROPANOL 67-63-0, TITANIUM DIOxIDE 13463-67-7, METHANOL 67-56-1, POLYTETRAFLUOROETHYLENE 9002-84-0 1
  87. Textured, single-component, moisture-curing, gun-grade polyurethane sealant. 1
  88. Thermal insulation material 1
  89. UV black with white print film, Acrylic-based adhesive 1
  90. Vinyl 6
  91. Vinyl Coated Cloth Backing, Natural Rubber Adhesive 1
  92. Virgin PTFE 1
  93. Water-borne, non-sagging, acrylic dispersion 1
  94. Water-borne, non-sagging, terpolymer dispersion 2
  95. Water-borne, terpolymer dispersion 1
  96. Waterproof PE film, cloth carrier, rubber based adhesive 1
  97. Show more options
R-Value
  1. R0.5 1
Size
  1. #40 Cylinder 1
  2. 0.5 Pint 4
  3. 1 1/2 lb 1
  4. 1 1/2" x 25 Yards 1
  5. 1 1/2" x 36" 1
  6. 1 1/2" x 60 Yards 1
  7. 1 Gallon 26
  8. 1 Pint 6
  9. 1 Quart 3
  10. 1" x 36 Y 1
  11. 1" x 60 Yards 1
  12. 1.88" 1
  13. 1.88" x 100' 1
  14. 1.88" x 150' 2
  15. 1.88" x 164' 1
  16. 1.88" x 180' 20
  17. 1/2" x 260" 1
  18. 1/4 Pint 2
  19. 1/8" x 2" x 30' 1
  20. 10 1/3 oz 1
  21. 10.1 Ounce 6
  22. 10.1 Ounces 5
  23. 10.3 fluid ounce cartridge 1
  24. 10.3 Fluid Ounces 2
  25. 10.3 Ounce 4
  26. 10.4 fl. oz. caulk tube, #20 Clear Sealant® 1
  27. 10.5 Ounce 4
  28. 10.6 fl. oz. caulk tube, #6 Mastic® 1
  29. 10.6 fl. oz. caulk tube, #9 Mastic® 1
  30. 11 Ounce 5
  31. 12 Ounce 3
  32. 12 Ounce can 1
  33. 12 Ounce straw foam can 1
  34. 12 Ounces 1
  35. 14 Ounces can 1
  36. 16 Ounce 6
  37. 16 Ounces 1
  38. 180' 1
  39. 2 1/2" x 108' 2
  40. 2 Gallon 2
  41. 2 Gallons 2
  42. 2 inch x 1/8 inch x 30 foot Roll 1
  43. 2 Pound 1
  44. 2" wide 1
  45. 2" x 1/8" 1
  46. 2" x 1/8" x 30' roll 2
  47. 2" x 100' 1
  48. 2" x 150' 2
  49. 2" x 180' 5
  50. 2" x 36 Y 1
  51. 2" x 75' 1
  52. 2.5" x 150' 3
  53. 2.5" x 180' 4
  54. 2.82" x 100' 1
  55. 2.82" x 150' 7
  56. 2.82" x 180' 7
  57. 2.82" x 360' 1
  58. 24 Ounce 1
  59. 260" x 1/2" 1
  60. 260" x 3/4" 1
  61. 3 Ounce 1
  62. 3 Pound 1
  63. 3" 1
  64. 3" x 100' 7
  65. 3" x 150' 15
  66. 3" x 180' 4
  67. 3" x 50 Yd. 1
  68. 3" x 50' 1
  69. 3/4" x 180' 1
  70. 3/4" x 66' x 0.007" 1
  71. 30' x 2" 2
  72. 35 1/2" x 200' 1
  73. 38 Pound Disposable Canister 1
  74. 4 Ounce 6
  75. 4 Ounces 1
  76. 4" x 150' 6
  77. 4" x 50 Yd. 2
  78. 48mm x 110M 1
  79. 5 Gallon 4
  80. 5" x 150' 3
  81. 5" x 50 Yd. 1
  82. 520" x 1/2" 1
  83. 53 Gallon 2
  84. 54 Gallon drum 1
  85. 55 Gallon 1
  86. 6 Pound 1
  87. 8 Ounce 10
  88. 8 Ounces 1
  89. Small kit 1
  90. Show more options
Thickness
  1. 0.005" 1
  2. 0.007" 1
  3. 0.177 mm 1
  4. 1/8" 7
  5. 10 mils 7
  6. 10.80 Mils 2
  7. 11 Mils 13
  8. 11.5 Mils 1
  9. 13 Mils 3
  10. 13.50 Mils 3
  11. 14 Mils 5
  12. 16 to 20 Mils 1
  13. 17 Mils 10
  14. 2 Mils 5
  15. 2.85 Mils 1
  16. 22 Mils 1
  17. 3 Mils 6
  18. 3" 1
  19. 3.10 Mils 3
  20. 3.20 Mils 1
  21. 3.3 Mils 3
  22. 3.5 mils 3
  23. 3.50 Mils 4
  24. 3.70 Mils 3
  25. 3.75 Mils 2
  26. 30 Mils 1
  27. 4 Mils 2
  28. 4.60 Mils 1
  29. 4.80 Mils 4
  30. 5 Mils 3
  31. 5.50 Mils 2
  32. 5.80 Mils 1
  33. 6 Mils 5
  34. 6.90 Mils 1
  35. 7 Mils 9
  36. 7.20 Mils 1
  37. 8 Mils 2
  38. 9 Mils (230 Mincrons) 4
  39. Show more options
Tier
  1. 320 1
  2. 373 1
  3. Airseal 11 2
  4. Airseal 22 2
  5. Airseal 33 2
  6. Airseal Zero 2
  7. AP Armaflex® 1
  8. Arctic™ 616L 1
  9. Armaflex® 7
  10. Cold Seal 728 3
  11. Cold Seal 791 1
  12. DiversiGum 1
  13. DuroSeal 1
  14. Fireseal 1
  15. Flex Seal® 1
  16. Gene™ 404L 3
  17. Glasstack 25 2
  18. Glasstack 35 2
  19. Hot™ 203L 2
  20. Ideal Seal® 1
  21. Jim PR-1L 2
  22. Pro-Air 1
  23. Pro-Tite 1
  24. Pyroseal™ 3
  25. RS 136 1
  26. Specialty Chemical 1
  27. T Plus 2® 1
  28. Vapor-Blok™ 1
  29. Vulkem® 116 1
  30. Show more options
Wall Thickness
  1. 1/8" 1
Product Price Inventory Actions
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Glasstack 25-5 Black, Water Based Insulation Adhesive
Item: POMGLASSTACK255
MFR: 1-GT25-05B-00
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Ideal Tape - 370 White PVC Tape 2" x 36 yd.
Item: IDE3702
MFR: 30370A02000036ANGFA
Checking price...
Checking inventory...
Ideal Tape - 491 AWF FSK Tape 4" x 50 yd.
Item: IDE4914
MFR: 3491AW04000050AQABI
Checking price...
Checking inventory...
Ideal Tape - 488 AWF Foil Tape 3" x 50 yd.
Item: IDE4883
MFR: 30488A03000050APACI
Checking price...
Checking inventory...
Ideal Tape - 488 AWF Foil Tape 2" x 50 yd.
Item: IDE4882
MFR: 30488A02000050ANACI
Checking price...
Checking inventory...
Ideal Tape® - 469 Black Cloth Duct Tape
Item: IDE469B2
MFR: 30469B02000060ANAAI
Checking price...
Checking inventory...
Ideal Tape - 491 FSK Tape 3" x 50 yd.
Item: IDE4913
MFR: 3491AW03000050APABI
Checking price...
Checking inventory...
Ideal Tape - 370 White PVC Tape 1-1/2" x 36 yd.
Item: IDE37015
MFR: 30370A01160036ALGFA
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Ideal Tape - 370 White PVC Tape 1" x 36 yd.
Item: IDE3701
MFR: 30370A01000036AHGFA
Checking price...
Checking inventory...
Ideal Tape - 488 AWF Foil Tape 4" x 50 yd.
Item: IDE4884
MFR: 30488A04000050AQACI
Checking price...
Checking inventory...
888 Natural Double Coated Tape, 1.5" by 60 yds.
Item: IDE88815
MFR: 30888A01160060EDGBA
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Ideal Tape - 469 Silver Cloth Duct Tape 2" x 60 yd.
Item: IDE4692
MFR: 30469A02000060ANAAI
Checking price...
Checking inventory...
Ideal Tape - 428 ASJ Discs, 2.5" by 36 yds.
Item: IDE428D
MFR: 30428D02160036AOWCI
Checking price...
Checking inventory...
Ideal Tape - 788 AWF Foil Tape 4" x 50 yd.
Item: IDE7884
MFR: 30788A04000050AQAGI
Checking price...
Checking inventory...
Ideal Tape - 491 FSK Discs, 2.5" by 36 yds.
Item: IDE491D
MFR: 3491D02160036AOWCI
Checking price...
Checking inventory...
Ideal Tape - 491 AWF FSK Tape 5" x 50 yd.
Item: IDE4915
MFR: 3491AWF0500050AOABI
Checking price...
Checking inventory...
Ideal Tape - Cold Seal 791 FSK AWF Tape 3" x 50 yd.
Item: IDE7913
MFR: 30791A03000050APAFI
Checking price...
Checking inventory...
Ideal Tape - 488 AWF Aluminum Foil Tape 5" x 50 yd.
Item: IDE4885
MFR: 3488A05000050A0AOACI
Checking price...
Checking inventory...
Ideal Tape - Cold Seal 788 AWF Foil Tape 3" x 50 yd.
Item: IDE7883
MFR: 30788A04000050APAGI
Checking price...
Checking inventory...
armacell - 520 Adhesive 1 qt.
Item: AAD520005
MFR: AAD520005
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Armacell - 520 Adhesive Black 1 qt.
Item: AAD520005STDB
MFR: AAD520005STDB
Checking price...
Checking inventory...
Armacell - 520 Adhesive 1 pt.
Item: AAD520003
MFR: AAD520003
Checking price...
Checking inventory...
Armacell - 520 Adhesive 1 gal.
Item: AAD520006
MFR: AAD520006
Checking price...
Checking inventory...
Checking price...
Checking inventory...
Grid
List
Items 1–36 of 270 total
Shop Honeywell products